Eden NEVER COMPROMISE Manual Del Usuario página 4

E D E N | W T D I P E D A L | PA N E L N A V I G A T I O N - 3
WTDI Panel Navigation:
1. XLR out; Connect to your mixer or other outboard equipment.
2. Groundlift for XLR output; Lifts ground for XLR output.
3. Jack socket output; Connect your WTDI to your amplifier or other equipment from.
4. Gain; Controls the input gain for your WTDI. (Tip if your sound is distorting even with this setting on low reduce the
output volume from your instrument to remove distortion before increasing this control) .
5. Bass; Increase or cut the bass frequency level.
6. Enhance; Use this Eden EQ sweep to enhance your EQ.
7. Bass boost; Add a bass boost to your sound with this switch.
8. Bypass switch; Turn your pedal off and on.
9. Mid; Increase or cut the mid frequency level.
10. Compressor; Increase the level of this control for more compression or set to 0 to turn the compression feature off.
11. Mid shift; Toggle between 550hz and 2.2kz mid range frequencies.
12. Power input; Input your included power supply cord.
13. Treble; Increase or cut the mid frequency level with this control.
14. Master; Control the output level of your WTDI.
15. Input; Plug your instrument into your WTDI.
N E V E R C O M P R O M I S E | 4
T M