Top Panel - ION Mustang LP Guia De Inicio Rapido

Features

Top Panel

1. Platter: Place your record here.
2. 45 RPM Adapter
Holds the included 45 RPM
adapter. When not using the
adapter, please place it in this
holder.
3. Tonearm: The fixed tonearm
can be raised and lowered by
hand, or by pressing the raise /
lower lever.
4. Arm Clip:
designed arm clip secures the
tonearm while at rest or when
not in use. The arm clip has
been designed to remain in the
up position while unlocked.
5. Raise / Lower Lever: Raises
and lowers the tonearm.
6. 33 / 45 / 78 Switch: This switch controls the
speed of the turntable platter.
Note: For best results when playing 78 RPM
vinyl records, use a 78 stylus (sold separately).
Only use a 78 stylus with 78 RPM vinyl records.
7. Autostop switch: This switch turns autostop
on or off. When autostop is on, the platter will
start spinning when the tonearm is placed over
the record and stop spinning when the record
has reached the end. When Autostop is off, the platter will always spin regardless of the
position of the tonearm.
Note: If your vinyl record stops before it reaches the end of the music, turn Autostop to
the off position for this particular record. This is generally recommended for 45 RPM
records.
Holder:
This specially
1
IMPORTANT: Remove
cartridge cover (needle cover) before
operating the turntable.
*WARNING: The RCA outputs are LINE
level. Please only connect these to LINE
level inputs. You may damage your
receiver if you plug in a LINE level device
into a PHONO level input.
2
3
5
6
7
4
the plastic
3