Setting The Clock / Programming The Timer - BALAY 3XM4H Serie Instrucciones De Uso

Instructions for Use
These fins are available in all operation
functions: cooling, dehumidification and air
purification.
The side fins close automatically when the
appliance is turned off via the "Off" key
If the side fins were open prior to turning
the appliance off, they open again when
the appliance is turned back on.
Setting the clock / Programming
the timer
Setting the clock
• The current time (24-hour clock) is
displayed in the top left-hand corner of
the screen the first time the appliance is
connected to the mains electricity
supply. 0:00 flashes by default.
• To set the time, it is necessary to turn
the appliance on by pressing the "On"
key . If you take more than 10
seconds to perform the next operation
during programming / setting the clock
on your appliance, the screen
automatically returns to the main menu
and the factory-set default settings are
displayed or, if this is not the first time
that the timer is set, the last settings
used are displayed on the screen.
• Press the "Timer" key
box appears on the timer menu with the
last function selected ("Off" is displayed
by default).
.
. The selection
60
• Use the "up" key to place the selection
box on the time. The time is modified
using the "+" and "–" keys. The time
increases or decreases by one minute
each time one of these keys is pressed.
Keep the key pressed in to increase or
decrease the minutes more quickly.
• Press the "Timer" key
the time. If you do not press this key, the
time is automatically memorised when a
period of 10 seconds has passed
without pressing any key. The screen
returns to the main menu.
10 sec/
, to memorise