Balluff BML-SB/C/E0-Q-M4-0-KA Serie Manual De Instrucciones página 49

BML-S _ B/C/E0-Q _ _ _ -M4 _ _ - _ 0-KA _ _ /KA _ _-S284
Incremental Magnetic Linear Encoder
10
Type code breakdown (continued)
BML-S_B/E...
S = Sensor head
LED reference signal:
1 = No LED, reference sensor with 5 mm (not for new applications)
2 = Green LED reference signal, center reference sensor
Construction:
B = Electronic non-linearity ±30 to ±40 μm
E = Electronic non-linearity ±50 μm
Supply voltage/output level:
Q51 = 10...30 V DC/digital rectangular signal RS422
Q53 = 10...30 V DC/level same as HTL operating voltage
Q61 = 5 V DC/digital rectangular signal RS422
Resolution (edge distance A/B):
F = 5 µm G = 10 µm
H = 25 µm K = 50 µm
Pole width:
M4 = 5 mm
Reference signal:
0 = No signal
1 = Single signal or fixed-periodic
2 = Pole-periodic signal
Limit switch sensors
0 = No limit switch sensor
3 = Two limit switch sensors
Min. edge distance/max. movement speed:
D0 = 0.12 µs E0 = 0.29 µs
G0 = 1 µs H0 = 2 µs
L0 = 8 µs N0 = 16 µs
Connection technology:
KA05 = 5 m cable, possible cable lengths 2, 5, 10, 15, 20 m
KA00.3-S284 = 0.3 m cable with M12 plug, 12-pin
www.balluff.com
BML - S2E0 - Q53G - M410 - P0 - KA05
F0 = 0.48 µs
K0 = 4 µs
P0 = 24 µs
english 23