Canon B1 Manual De Instrucciones De Operación página 9

4. Alignment Setting
Alignment is the distance of the Top punched hole from the side
edge of the sheet (viewed from the punch output orientation). This
distance can be adjusted by entering the Settings section (press
Up or Down arrow from the Home screen, and press OK for
Settings). Pressing Up arrow will increase the Alignment position,
and Pressing Down arrow will decrease the Alignment position.
"+" ON THE LCD
INCREASES
ALIGNMENT
OFFSET
ALIGNEMENT
"-" ON THE LCD
DECREASES
ALIGNMENT
OFFSET
5. Clear Cover
The Backgage Depth setting and Alignment setting for Clear
Cover media can be adjusted using this function.
6. Language
The LCD panel can be configured to display one of the following
languages: English; Francais; Espanol; Deutsch or Italiano.
Displaying Information on the LCD Panel
1. Die type
The type of die set that is presently installed in the machine will
be displayed.
2. Punch cycles
This is the total number of punched sheets the system has
processed.
3. Firmware
This displays the current level of firmware of Professional
Puncher.
Multi Function Professional Puncher – B1
EN
9