Starting A Cold Engine; Starting A Warm Engine - Malaguti XTM 2007 Manuel Du Propriétaire

OPERATION AND IMPORTANT RIDING POINTS

STARTING A COLD ENGINE

1. Turn main switch to "
2. Shift the transmission into neutral position.
When the transmission is in neutral position, the neutral
indicator light should be on, otherwise have a MALAGUTI
Dealer check the electrical circuit.
3. Operate the choke if necessary, and fully close the throttle grip.
4. Press the kickstarter to run the engine.
5. After the engine has started, move the choke lever back half-
way.
5
For maximum engine life, never accelerate hard when
the engine is cold.
6. When the engine is warm, turn the choke off.
The engine is warm when it responds normally to the
throttle with the choke turned off.
26
".

STARTING A WARM ENGINE

To start a warm engine, the choke is not required.
Before using the vehicle for the first time, read the En-
gine break-in section.
ENGLISH