Setting The Ignition Point With Burner In Stand-By - baltur BT 320 Guía Rápida

SETTING THE IGNITION POINT WITH BURNER IN STAND-BY

In case of troubles, the burner will go on lock-out mode and the
reason will be indicated on the display.
Check the lock code & press ENTER to unlock.
Press ENTER to modify the positions (burner in stand-by).
Click up to increase the gas opening position or down to decrease it.
Right click to move from gas servomotor adjustment to air
servomotor adjustment.
5 / 50
0006081511_201311