Friedrich HM12YJ Manual De Instalación página 13

3
Pull back the tubing holder.
4
Remove the pipe port cover and position
the piping.
Indoor unit back side view
Right
Downwards
* The feature can be changed according to the
type of model.
Good case
- Press the tubing cover and slowly unfold the
tubing to downward. And then bend to the
left side slowly.
- Following bending case from right to left
Tubing holder
Left
Backwards
* The feature can be changed according to the
- Before bending the tubing, set the conduit
Bad case
directly may cause damage to the tubing.
type of model.
CAUTION
!
Installation Information. For right piping.
Follow the instruction above.
like picture below by using the bracket and
black screws from accessory kit.
13