Eneo VKCD-1322 Instrucciones De Instalación Y Manejo página 20

5. Installation
Wall or ceiling
Torx wrench key
Surface mount base
Mount screws
and mount cap
Dome base
Machine screws
with rubber
Decoration ring
Dome cover
The camera can be installed on a junction box or directly on
the wall / ceiling.
. Fix the surface mount bracket by screws on the ceiling.
. Draw out power / video wires to the connecting places.
3. Connect the dome base to the surface mount bracket by
screws with rubber ring (see page ).
4. Adjust desired focus and scene by turning and moving
the hemisphere by hand.
5. Put the dome cover over the base and adjust direction.
6. Fix the dome cover on the base by L-wrench.
0