Campbell Hausfeld PS460G Manual De Uso página 15

Operating Instructions and Assembly Instructions
Airless Paint Sprayers
CLEAN UP FOr CHANGING PAINTS
Or TEMPOrAry STOrAGE FOr
MOrE THAN ONE NIGHT (Continued)
17. Make sure prime/spray control is in
SPRAy position to reduce dribbling.
18. Turn pressure to LOW (completely
counterclockwise).
19. Turn off the engine.
20. With gun pointed in safe direction
pull trigger with lock released to
relieve any pressure in hose.
21. Engage gun trigger lock.
22. Clean buckets and dispose of any
waste paint and cleaning fluid in
an environmentally responsible
manner.
23. Clean tip guard with cleaning brush
and cleaning fluid.
NOTE: At this point, pump, hose and
spray gun are clean, but still require
further preparation for storage of more
than one day.
Shutdown
17
Prime/Spray is
in SPRAy/ROLL
Position
20
Pull Gun Trigger with
Trigger Lock Released
15 15
18
Turn Pressure to LOW
(completely counterclockwise)
21
To lock locked
Engage Gun Trigger Lock
www.chpower.com