Installation - MSA SingleLine SCOUT Manual De Instrucciones

Installation

3 Installation
Disassembling SingleLine Gauge
For disassembling the SingleLine gauge, a Torx spanner and a small screw driver are required.
GB
CAUTION!
The screws are not reusable and MUST be replaced with new ones after each disassembly.
6
(1) Unscrew the back cover of the SingleLine gauge with a
Torx T10 spanner.
(2) Lift the back cover.
(3) Remove the U-clip with a small screw driver.
(4) Pull the SingleLine manifold out.
SingleLine SCOUT