Measuring Area; Measuring Volume - Stanley TLM99 Manual Del Usuario

Measuring Area

E
You can measure the area of a wall, floor, or object.
1. Click (Figure
2. The tool will measure the distance from the bottom of
the tool to the wall or object (Figure
To measure from the top of the tool instead of the
bottom (Figure
On the display window, the tool icon will change from
to
3.
Click to show
(Figure #4).
E
4. Measure the width.
• Point the top of the tool at one side of the target
(wall, floor, or object).
• Position the tool at one end of the target and point
the laser dot across the width. (Figure
where to position the tool if you are measuring from
the bottom of the tool.)
• Click to display the width measurement at the
top of the display window.
5. Measure the length.
• Position the tool at one end of the target and
point the laser dot across the length. (Figure
#2 shows where to position the tool if you are
measuring from the bottom of the tool.)
• Click to display the length measurement on the
second line of the display window.
6.
View the Area measurement at the bottom of the
display window (Figure

Measuring Volume

You can measure the volume of a room or object.
1.
Click (Figure
2. The tool will measure the distance from the bottom of
the tool to the wall or object (Figure
To measure from the top of the tool instead of the
bottom (Figure
On the display window, the tool icon will change from
to
6
#5) to turn on the tool.
A
#1).
F
#2), hold for 2 seconds.
F
(Figure #5).
E
on the display window
G
#3).
E
#5) to turn on the tool.
A
#1).
F
#2), hold for 2 seconds.
F
(Figure #5).
E
3. Click
window (Figure
4. Measure the width.
• Point the top of the tool at one side of the target
(room or object).
• Position the tool at one end of the target and point
the laser dot across the width. (Figure
where to position the tool if you are measuring from
the bottom of the tool.)
• Click
top of the display window.
5. Measure the length.
• Position the tool at one end of the target and
point the laser dot across the length. (Figure
#2 shows where to position the tool if you are
measuring from the bottom of the tool.)
#1 shows
• Click
second line of the display window.
6. Measure the height.
• Positon the tool at one end of the target and point
the laser dot across the height.
(Figure
you are measuring from the bottom of the tool).
• Click
G
third line of the display window.
7.
View the Volume measurement at the bottom of the
display window (Figure
Adding Measurements
You can add two measurements to get a total
measurement of the two distances.
1.
Click
2. The tool will measure the distance from the bottom of
the tool to the wall or object (Figure
To measure from the top of the tool instead of the
bottom (Figure
On the display window, the tool icon will change from
to
3. Point the laser at the top of the tool (Figure
toward the wall or object whose distance you need to
measure.
twice to show on the display
#4).
E
to display the width measurement at the
to display the length measurement on the
#3 shows where to position the tool if
H
to display the height measurement on the
#3).
E
(Figure #5) to turn on the tool.
A
#2), hold
F
(Figure #5).
E
#1 shows
H
H
#1).
F
for 2 seconds.
#1)
A