Taski swingo 350B Manual De Instrucciones página 71

Squeegee assembly
• Lie the squeegee on the floor in front
of the machine.
• Tilt the machine towards the back
and run over the squeegee.
• Place the machine back on the floor.
• Set the locking nuts into the foreseen
slots.
• Turn the locking nuts 90°.
Filling the fresh water tank
Attention:
Max. permissible water temperature
60 °C/140 °F.
Diversey recommends using cold water as
hot water will adjust to the ground tem-
perature as soon as it is in contact with the
ground. Thus there are no advantages to
using hot water.
• The machine must be switched off.
• Remove the rubber cap from the solution tank.
• Fill water into the solution tank until
the maximum filling level is reached.
10L
• Refit the rubber cap to the solution tank.
Dosing:
Attention:
Wear gloves, goggles and appropriate
(protective) working clothes when han-
dling chemical products!
Notice:
Use chemical products recommended by
Diversey only and always observe the
product information.
Caution:
Using unsuitable products (e.g. products
containing chlorine, acids or solvents) may
cause harm to health and severe damage
to the machine.
Notice:
For a precise dosage, use the scale in the
dosage cup.
The filling level mark on the tank corre-
sponds to the mark in the dosage cup. The
type of machine is also noted in the dos-
age cup!
Dosing examples:
Information on the pack-
age of the product
0.25% 25 ml for 10l
of water
0.5% 50ml for 10l
of water
• Fill the dosing cup with a suitable product and pour the con-
tent into the fresh water tank. Repeat the procedure until
the required dosing is reached.
• When dosing is finished, the dosing cup will remain in the
tank.
Dosing variants
• The TASKI J-Flex or the QFM dosing station can also be
used for simple and fast dosing.
For further details, please contact your TASKI service part-
ner.
Pre-cleaning
Attention:
Remove any objects (wooden, metal parts
etc.) from the cleaning surface.
The objects could be catapulted by the ro
tating tool, and thereby cause injuries to
people and damage to the environment.
Tank capaci- Product vol-
ty ume per
tank filling
10l 0.25l
10l 0.5l
69
EN
-