Product Description; Inserting The Batteries; Operation; Maintenance And Care - ANSMANN 1600-0265 Operación Manual

− If the battery fluid has caused a skin reaction or has
come into contact with your eyes, contact a medical
professional immediately.
− Do not short-circuit the batteries!
− Remove used or empty batteries from the lamp
immediately
− If the lamp can no longer be used, the batteries must
be removed from the lamp before it is disposed of
PRODUCT DESCRIPTION (SEE PAGE 2)
1 On/off button
2 COB LED
3 TOP LED

INSERTING THE BATTERIES

4 batteries are included with the delivery. In order to activate
the product, open the battery compartment by sliding the
battery compartment cover downwards. The remove the
battery contact protective insert so that the spring contact
makes contact with the batteries.
When replacing batteries, ensure that the batteries are
inserted with the correct polarity.

OPERATION

Button
Press 1x
Press 2x
Press 3x
Press 4x
The work lamp can be hung from suitable hanging points with
the help of the hanging device.
The magnets on the rear of the lamp enable the product to be
mounted on most magnetisable surfaces.

MAINTENANCE AND CARE

Cleaning
• Always disconnect the power supply before cleaning the
product.
Deutsch |
10
4 Hanging hook
5 Mounting magnets
6 Battery compartment
Function
Switch on the torch beam (TOP LED)
Switch off the TOP LED
Switch on the work light (COB LED)
Switch off the COB LED
English
| Français | Español | Português
Svenska | Italiano | Nederlands