6. "g" s dsplayed. Ths s the Calbraton Weght Unt. Press -Yes to
accept (or press -No to swtch to "lb", then press -Yes) and move on to the
next parameter. Refer to the followng chart for the next steps.
Selected calibration weight unit: g
Scale Capacty
Dsplayed Settng
2/3 of Capacty
Full Capacty
Selected Calibration weight unit: lb
Scale Capacty
Dsplayed Settng
2/3 of Capacty
Full Capacty
7. "xxxx" s dsplayed. Ths s the Full Scale Capacty of the scale. Make
sure the dsplayed value matches the scale model capacty then press -Yes
to accept and move on to the next parameter.
8. "- - - - - -" s dsplayed. Make sure the pan s empty and stable at ths tme
then press -Yes. The dsplay wll count down from 5 to 0 as the scale zero
s regstered.
9. "xxxx" s dsplayed. Ths s the Calbraton Pont correspondng to 2/3 of
the Full Scale Capacty value. Place the ndcated calbraton weght on
the center of the pan. Wth the scale stable, press -Yes. The dsplay wll
count down from 5 to 0 as the scale regsters the calbraton weght.
10. "xxxx" s dsplayed. Ths s the Calbraton Pont correspondng to the Full
Scale Capacty value. Place the ndcated calbraton weght on the center
of the pan. Wth the scale stable, press -Yes. The dsplay wll count down
from 5 to 0 as the scale regsters the calbraton weght.
11. "SAVE" s dsplayed when calbraton was regstered. Remove the
calbraton weght, then press -Yes. The scale wll dsplay a self-test then
return to normal weghng mode. Or, press -No to abort calbraton wthout
savng any changes.
Note: At any tme durng the calbraton process, long-press ON/UNITS OFF to turn
off the scale and abort the process wthout savng any changes.
1.5 kg / 3 lb
3 kg / 6 lb
1500
1000 / 1 kg
2000 / 2 kg
1500 g
3 lb / 1.5 kg
6 lb / 3 kg
3000
2000 / 2 lb
4000 / 4 lb
3000 / 3 lb
6000 / 6 lb
BW SERIES COMPACT BENCH SCALE EN-
6 kg / 15 lb
3000
4000 / 4 kg
3000 g
6000 g
15 lb / 6 kg
6000
15000
10000 / 10 lb
15000 / 15 lb
15 kg / 30 lb
6000
15000
10000 / 10 kg
15000 g
30 lb / 15 kg
30000
20000 / 20 lb
30000 / 30 lb