FTE Univers U3500 Manual De Instalación página 21

INSTALLATION OF THE ANTENNA
2º ASSEMBLY OF THE ANTENNA
Place the bracket for antenna at the chosen place and fix it using
the provided elements (wedges, screws and bridles).
Then, proceed to place the antenna on the bracket; adjust and fix it
using the screw and hexagonal provided key. Leave some horizontal
mobility (or vertical, according to your case) to the antenna for the
configuration of the direction.
Image 1
3º DIRECTION OF THE ANTENNA
Orientate the antenna towards your closest repeater, and then finish
adjusting the elevation of the antenna.
Introduce the protector of the connector in the cable and install the
F type connector, as it is showed in the following image 1.
Connect the cable to the antenna; use a signal measurer (or another
equipment which provides information on the level and quality of the
signal that arrives to the antenna, for instance your DVB-T receiver)
to finish adjusting the antenna in elevation and azimuth.
Finish tightening the screws and checking that antenna is well
subjected.
7 7