Key Beep; Transaction Counter; Password; Reset - OHAUS Defender 5000 Serie Manual De Instrucciones

Defender 5000 Indicators

3.4.8 Key Beep

Set how the beeper sounds when a key is pressed.
Off = no sound
On = sound

3.4.9 Transaction Counter

The transaction counter is a seven-digit counter that tracks the total transactions. When the value
reaches 9,999,999, the next transaction causes a roll-over to 0000001.
Off = the transaction counter will not increase.
On = the transaction counter will increase with the additional menu item Next Transaction
available.
3.4.9.1 Next Transaction
The value of the next transaction displays in the Next Transaction field.

3.4.10 Password

Set the password.
Off = the menu is accessed freely without password.
On = the menu is accessed only after entering a password up to 6 digits.

3.4.11 Reset

Reset the Setup menu to the factory defaults (except Range, Capacity and Graduation).
No = not reset.
Yes = reset.
NOTE: If the Security Switch is set to ON, the Capacity Unit, Range, Capacity, Graduation and Power
On Zero settings are not reset.

3.5 Readout Menu

Enter this menu to customize display functionality. Default settings are bold.
Read Out Options
0.5d, 1d, 2d, 5d

Stability

+/-2%, +/-100%
Zero Range
Low, Medium, High
Filter Level
Off, 0.5d, 1d, 3d
Auto Zero Track
Off, 1min, 2min, 5min,10min, Always On
Backlight
Off, 5min, 10min, 30min
Screensaver
Off, 5min, 10min, 30min
Auto Off
Off, 5min, 10min, 30min
Base Auto Off
1, 2, 3, 4, 5
Adjust Contrast
Reset
3.5.1 Stability
Set the amount the reading can vary before the stability symbol turns off.
0.5d = 0.5 scale division
1d = 1 scale division
2d = 2 scale divisions
5d = 5 scale divisions
EN-23