EN-26
For more details, see the table below.
Application Mode
& Discrete I/O
Weighing
Counting
Check
Percent
Dynamic
Reset
3.7 Weighing Unit
Enter this menu to activate the desired units. Default settings are bold.
NOTE: Due to national laws, the indicator may not include some of the units of measure listed. If the
Security Switch is set to ON, the Units are locked at their current setting.
3.7.1 Gram (g)
Set the status.
Off = Disabled
On = Enabled
Options (bold is default)
On, Off
Enable
Discrete Input1
Off, Zero, Tare, Clear Tare, Print, Unit, Accumulate
Discrete Input2
Off, Zero, Tare, Clear Tare, Print, Unit, Accumulate
Discrete Output1
Off, Overload, Underload, Zero
Discrete Output2
Off, Overload, Underload, Zero
Discrete Output3
Off, Overload, Underload, Zero
Off, Overload, Underload, Zero
Discrete Output4
Enable
On, Off
Discrete Input1
Off, Zero, Tare, Clear Tare, Print, Unit, Accumulate
Discrete Input2
Off, Zero, Tare, Clear Tare, Print, Unit, Accumulate
Discrete Output1
Off, Overload, Underload, Zero
Discrete Output2
Off, Overload, Underload, Zero
Off, Overload, Underload, Zero
Discrete Output3
Discrete Output4
Off, Overload, Underload, Zero
Enable
On, Off
Discrete Input1
Off, Zero, Tare, Clear Tare, Print, Unit, Accumulate
Discrete Input2
Off, Zero, Tare, Clear Tare, Print, Unit, Accumulate
Off, Under, Over, Accept, Under/Over, Overload,
Discrete Output1
Underload, Zero
Off, Under, Over, Accept, Under/Over, Overload,
Discrete Output2
Underload, Zero
Off, Under, Over, Accept, Under/Over, Overload,
Discrete Output3
Underload, Zero
Off, Under, Over, Accept, Under/Over, Overload,
Discrete Output4
Underload, Zero
Enable
On, Off
Enable
On, Off
Off, Zero, Tare, Clear Tare, Print, Start, Reset
Discrete Input1
Discrete Input2
Off, Zero, Tare, Clear Tare, Print, Start, Reset
Discrete Output1
Off, Overload, Underload, Zero
Off, Overload, Underload, Zero
Discrete Output2
Discrete Output3
Off, Overload, Underload, Zero
Discrete Output4
Off, Overload, Underload, Zero
Defender 5000 Indicators