Technical Data; Inserting/Replacing The Battery; Initial Operation - Bosch PLL 360 Manual Original

OBJ_BUCH-979-002.book Page 12 Wednesday, December 9, 2009 12:50 PM
12 | English

Technical Data

Cross-line Laser
Article number
Working range (dia-
1)
meter), to approx.
Levelling Accuracy
Self-levelling range,
typically
Levelling duration,
typically
Operating temperature
Storage temperature
Relative air humidity, max.
Laser class
Laser type
C
6
Tripod mount
Batteries
Rechargeable batteries
Operating life time,
approx.
Weight according to
EPTA-Procedure 01/2003
Dimensions
1) The working range can be decreased by unfavourable
environmental conditions (e.g. direct sun irradiation).
Please observe the article number on the type plate of
your measuring tool. The trade names of the individual
measuring tools may vary.
Assembly

Inserting/Replacing the Battery

Using alkali-manganese or rechargeable batter-
ies is recommended for operation of the meas-
uring tool.
To open the battery lid 5, press on the latch 6
and fold the battery lid up. Insert the batter-
ies/rechargeable batteries. When inserting, pay
attention to the correct polarity according to the
representation on the inside of the battery lid.
1 609 929 T98 | (9.12.09)
Always replace all batteries/rechargeable bat-
teries at the same time. Do not use different
brands or types of batteries/rechargeable bat-
PLL 360
teries together.
3 603 F63 000
Remove the batteries/rechargeable batter-
ies from the measuring tool when not using
20 m
it for longer periods. When storing for longer
±0.4 mm/m
periods, the batteries/rechargeable batteries
can corrode and discharge themselves.
±4°
4 s Operation
+5 °C ... +40 °C

Initial Operation

–20 °C ... +70 °C
90 %
Protect the measuring tool against mois-
ture and direct sun light.
2
Do not subject the measuring tool to ex-
635 nm, <1 mW
treme temperatures or variations in tem-
1
perature. As an example, do not leave it in
1/4"
vehicles for longer periods. In case of large
4 x 1.5 V LR6 (AA)
variations in temperature, allow the measur-
4 x 1.2 V HR6 (AA)
ing tool to adjust to the ambient temperature
before putting it into operation. In case of ex-
treme temperatures or variations in tempera-
12 h
ture, the accuracy of the measuring tool can
be impaired.
0.5 kg
Avoid heavy impact to or falling down of the
125 x 85 x 70 mm
measuring tool. Damage to the measuring
tool can impair its accuracy. After heavy im-
pact or shock, compare the laser line with a
known horizontal or vertical reference line.
Switch the measuring tool off during trans-
port. When switching off, the levelling unit,
which can be damaged in case of intense
movement, is locked.
Bosch Power Tools