Faq - Tomahawk Coach By Color Manual De Instrucciones

FAQ

MY COMPUTER DOES NOT SWITCH ON AFTER ONE OR SEVERAL PEDAL REVOLUTIONS.
The charge capacity of the LiPo battery is depleted. However, this only occurs after extremely
long stationary periods, i.e. if the bike has not been used for a period of several weeks or more. In
this case, you must pedal with a cadence > 50 RPM, to activate the computer.
You can find further information in this manual.
COACH BY COLOR® ISN'T WORKING
In this case, user settings may have not been input. Coach By Color® requires you to enter your
user settings, as this is used to calculate the FTW index value. Only by entering the user settings
is it possible to define training zones.
MY COMPUTER DOESN'T SWITCH ON UNTIL MY CADENCE IS > 50 RPM. ALSO, A FLASHING
BATTERY SYMBOL IS DISPLAYED IN THE TOP LEFT HAND CORNER OF THE DISPLAY. IF I THEN
PEDAL SLOWER, THE BACKGROUND AND FRONT LIGHTING ARE SWITCHED OFF.
This occurs if the charge capacity of the LiPo battery is depleted. The flashing battery symbol
normally disappears after 2-3 minutes if you are pedaling with a cadence > 50 RPM. To continue
to charge the battery, you must pedal for a longer time period.
IF I PERFORM A COACH BY COLOR® WORKOUT, THE COLORS ARE ONLY DISPLAYED ON THE
BACKGROUND LIGHTING AND THE FRONT LIGHTING REMAINS OFF.
This is most probably due to the settings. Go to the settings menu and select the GENERAL item,
and repeatedly press the confirm button, until you reach the FRONT LED setting. Set the option
to ON. Exit the settings menu and then select either the Standard or Advanced training mode
(with COLORS ON). The front LED lighting should now be active again.
If the front LED light does not light up despite setting the option under SETTINGS > FRONT LED
> ON and entering your user settings, please refer to our service.
Version 1.2 Coach By Color Computer | Copyright by Indoor Cycling Group GmbH 2015 | www.indoorcycling. com