Battery Status Display - Tomahawk Coach By Color Manual De Instrucciones

INTEGRATED ENERGY SUPPLY
The IC7 Indoor Bike is equipped with an independent energy supply by means of an integrated
generator and a rechargeable lithium polymer (LiPo) accumulator. No additional equipment in
the form of batteries is necessary to ensure that the bike's computer is operational.
INTEGRATED ENERGY MANAGEMENT
For low pedaling frequencies under 50 RPM, the energy is supplied by a built-in LiPo accumulator.
When the cadence exceeds around 50 RPM, enough energy is generated to supply the system
with power and if necessary charge the LiPo battery.
ACCURACY OF THE POWER DISPLAY
The accuracy with an average deviation of just ± 1 % is maintained within a revolution range of
40 - 120 RPM and with a braking efficiency of between 50 - 900 watts.

BATTERY STATUS DISPLAY

If the charge capacity of the battery has almost been depleted, a flashing battery symbol is
shown on the left side of the display.
If you pedal with a cadence of > 50 RPM for several minutes, the flashing battery symbol
disappears. It is then possible to operate the computer in battery mode for several minutes,
during which user settings can be input.
If the battery status display is active and the cadence reduces or if you brake or stop pedaling
after a short period of time, the background lighting and the front display are switched off. This
protects the battery during this operating mode.
Please note that as long as the battery status display is active, the console may be switched off
suddenly even while a key is being pressed.
7