Honda BF40D Manual De Instrucciones página 572

5) Remove the two 6 mm lock pins and the two 6 mm washers
from the two remote control cables, and remove the
remote control cables from the throttle arm and the shift
1
link B.
Remove the two 6 mm washers from the shift pivot of the
2
respective remote control cables.
3
4
5
6
7
8
9
10
11
12
6) Remove the two remote control cables from the under case
13
grommet A and the remote control cable plate.
14
7) Remove the remote control cable plate.
15
8) Open the harness band clip.
16 9) Remove the under case grommet A from the engine under
case, and remove the starter cable and the handle cable
from the under case grommet A.
17
18
19
20
16-7
[1]
SHIFT
PIVOT (2)
[2]
THROTTLE
ARM
[7]
REMOTE CONTROL
CABLE [SHIFT SIDE]
[1]
REMOTE CONTROL
CABLE [THROTTLE SIDE]
[6]
REMOTE CONTROL
CABLE PLATE
[5]
UNDER CASE
GROMMET A
[4]
HANDLE
CABLE
[3]
HARNESS
BAND CLIP
572
[3]
[4]
6 mm
6 mm LOCK
WASHER (4)
PIN (2)
[5]
SHIFT
LINK B
[6]
REMOTE CONTROL
CABLE [THROTTLE SIDE]
[2]
REMOTE CONTROL
CABLE [SHIFT SIDE]