Brother QL-570 Guía De Configuración Y Uso página 32

26
STEP2 Installing the software
For Network interface cable users (Manual Network Configuration)
9
(Mac OS
Printing at the top of the screen. Enter the IP
address of the printer into the Printer
Address box. Choose QL-XXX from the list
and click Add again to add the printer to the
Printer Setup Utility.
(Mac OS
choose IP Printer / IP at the top of the
screen. Enter the IP address of the printer
into the Address box. Choose QL-XXX from
the list and click Add again to add the printer
to the Printer Setup Utility.
When specifying the Queue Name, use the value BRNxxxxxxxxxxxx at where
xxxxxxxxxxxx is the Ethernet address.
10
When the screen returns to the Printer List / Print & Fax screen,
check that "QL-XXX" is added, and close the Printer List / Print &
Fax screen.
Now you can use the machine.
For details on software, see the P-touch Editor Help.
Installing the BRAdmin Light configuration utility for Mac
The BRAdmin Light is a utility for initial setup of Brother network connected devices. It
can also search for Brother products on your network, view the status and configure
basic network settings, such as IP address.
For more information on BRAdmin Light, visit us at http://solutions.brother.com.
If you are using Personal Firewall software, BRAdmin Light may fail to detect the
unconfigured device. In that case, disable your Personal Firewall software, try
BRAdmin Light again. Re-start your Personal Firewall software after the address
information is set.
1
Double click [BRAdmin Light.pkg] in the
[Mac OS X] folder.
The BRAdmin Light Installer starts up. Follow the
on-screen instructions.
® X 10.3.9) Click Add and choose IP
®
X 10.4.x - 10.5) Click Add and
®