Descargar Imprimir esta página

ASROCK AM2XLI-eSATA2 Manual Del Instrucciones página 29

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

2.11
2.11 Serial A
2.11
Serial A
Serial A
Serial AT T T T T A (SA
A (SA
A (SAT T T T T A) / Serial A
A (SA
2.11
2.11
Serial A
A (SA
Installation
Installation
Installation
Installation
Installation
This motherboard adopts ULi
Serial ATAII (SATAII) hard disks and RAID (RAID 0, RAID 1, RAID 0+1, JBOD, and
RAID 5) functions. You may install SATA / SATAII hard disks on this motherboard
for internal storage devices. This section will guide you to install the SATA / SATAII
hard disks.
STEP 1: Install the SATA / SATAII hard disks into the drive bays of your chassis.
STEP 2: Connect the SATA power cable to the SATA / SATAII hard disk.
STEP 3: Connect one end of the SATA data cable to the motherboard's SATAII
connector.
STEP 4: Connect the other end of the SATA data cable to the SATA / SATAII hard
disk.
1. If you plan to use RAID 0, RAID 1, or JBOD functions, you
need to install at least 2 SATA / SATAII hard disks. If you plan to use
RAID 5 function, you need to install at least 3 SATA / SATAII hard disks.
If you plan to use RAID 0+1 function, you need to install at least 4 SATA
/ SATAII hard disks. If you install 2 eSATAII devices, then only RAID 0,
RAID 1, or JBOD functions will be enabled.
2. If you plan to use RAID functions on SATA / SATAII, SATA / SATAII HDDs
must be operated in "RAID" mode.
3. "RAID" and "non-RAID" mode are options under "SATA Operation Mode" in
BIOS setup. Please refer to page 44 for details.
2.12
2.12
2.12 Driver Installation Guide
2.12
2.12
Driver Installation Guide
Driver Installation Guide
Driver Installation Guide
Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom
side to install those required drivers. Therefore, the drivers you install can work
properly.
ASRock AM2XLI-eSATA2 Motherboard
A) / Serial AT T T T T AII (SA
A) / Serial A
A) / Serial A
AII (SAT T T T T AII) Hard Disks
AII (SA
AII (SA
A) / Serial A
AII (SA
®
M1697 chipset that supports Serial ATA (SATA) /
AII) Hard Disks
AII) Hard Disks
AII) Hard Disks
AII) Hard Disks
2 9
2 9
2 9
2 9
2 9

Publicidad

loading