ASROCK AM2XLI-eSATA2 Manual Del Instrucciones página 7

CAUTION!
1. For power-saving's sake, it is strongly recommended to enable AMD's Cool 'n'
Quiet TM technology under Windows system. See APPENDIX on page 55 of
"User Manual" in the support CD to enable AMD's Cool 'n' Quiet
2. This motherboard supports Untied Overclocking Technology. Please read "Un-
tied Overclocking Technology" on page 32 for details.
3. This motherboard supports Dual Channel Memory Technology. Before you
implement Dual Channel Memory Technology, make sure to read the
installation guide of memory modules on page 11 for proper installation.
4. Although this motherboard offers stepless control, it is not recommended to
perform over-clocking. Frequencies other than the recommended CPU bus
frequencies may cause the instability of the system or damage the CPU.
5. While CPU overheat is detected, the system will automatically shutdown.
Before you resume the system, please check if the CPU fan on the motherboard
functions properly and unplug the power cord, then plug it back again. To
improve heat dissipation, remember to spray thermal grease between the
CPU and the heatsink when you install the PC system.
6. This motherboard supports Dual Graphics XLI technology, please read
"Dual Graphics Feature" on page 14 for jumper settings. PCIE4 slot is
intended for Dual Graphics XLI function. If you plan to install only one PCI
Express VGA card to this motherboard, please install it to PCIE2 slot. For
the information of the compatible Dual Graphics XLI Mode PCI Express
VGA cards, please refer to the "Supported PCI Express VGA Card List for
Dual Graphics XLI Mode" on page 9. For the proper installation of PCI
Express VGA card, please refer to the installation guide on page 13.
7. For microphone input, this motherboard supports both stereo and mono modes.
For audio output, this motherboard supports 2-channel, 4-channel, 6-channel,
and 8-channel modes. Please check the table on page 3 for proper connection.
8. Before installing SATAII hard disk to SATAII connector, please read the
"SATAII Hard Disk Setup Guide" on page 28 to adjust your SATAII hard disk
drive to SATAII mode. Besides, you are allowed to downgrade the SATAII
hard disk to SATA hard disk (from SATAII 3Gb/s down to SATA 1.5Gb/s),
and connect it to the SATAII connector. You can also connect SATA hard
disk to SATAII connector directly.
9. This motherboard supports eSATAII interface, the external SATAII
specification. Please read "eSATAII Interface Introduction" on page 25 for
details about eSATAII and eSATAII installation procedures. (Port Multiplier
Technology is not supported with eSATAII interface on this motherboard.)
10. Power Management for USB 2.0 works fine under Microsoft
TM
Vista / XP 64-bit / XP SP1 or SP2 / 2000 SP4.
® ®
11. Microsoft Windows Vista
website in the future. Please visit our website for Microsoft
driver and related information.
ASRock website http://www.asrock.com
ASRock AM2XLI-eSATA2 Motherboard
TM
driver is not ready yet. We will update it to our
TM technology.
® ®
Windows
® ® TM
Windows Vista
7 7 7 7 7