Cleaning; Disposal And Recycling; Warranty - Kinetec Spectra XL Manual De Empleo

14.3. Cleaning

Before carrying out any cleaning operation, SWITCH OFF the unit and disconnect the power supply. In order
to ensure optimal hygiene, you are advised to clean the machine for each new patient.
Cleaning should be carried out in the environmental conditions specified in the "Technical Specifications"
section below.
Use a DISINFECTANT product (alcohol-free or <5% alcohol solution) in spray (plastic cases and metal
components).
In order to ensure optimal hygiene, you are advised to clean the covers for each new patient. All the
consumables enable hazard-free disposal.

14.4. Disposal and recycling

• Packaging: The packaging must be separated into plastic and paper / cardboard components and
a
taken to special recycling sites.
b • Kinetec patient pad kit: Clean with a disinfectant product then take it to special recycling sites.
®
c • Unit: It contains electronic components, cables, aluminium, steel and plastic parts. When the machine is
no longer operational, disassemble it, separate it into different types of material and take these to
authorised recycling centres or return the machine to Kinetec SAS for destruction. Or contact the local
authorities to determine the appropriate method of disposal for parts and accessories that are
potentially hazardous to the environment.

14.5. Warranty

The Kinetec warranty is strictly limited to the replacement, free of charge, or to factory repairs of part(s)
®
recognised as defective.
Kinetec SAS guarantees its continuous passive motion systems for 2 years against all defects of manufacture
from the date of purchase by the consumer.
Kinetec SAS is the only organization able to assess the application of the warranty to its systems.
The warranty will be considered null and void if the device has been used abnormally or under conditions of
use other than those indicated in the user's manual.
The warranty will also be considered null and void in the event of deterioration or an accident due to
negligence, inappropriate surveillance or inappropriate maintenance, or due to transformation of the
equipment or an attempt to repair the equipment.
Kinetec Spectra XL™
EN 16/20