5
Settings
DIP switch / potentiometer assignment 2
5.3
DIP switch / potentiometer assignment 2
(from software version 09.00.00 onwards)
Devices with the E84DGDVBxxx4xxP type designation only provide setting
options with potentiometer P1.
Settings with P1
(Lenze setting bold)
Use P1 to write a preset speed setpoint to C00039/3. C00039/3 is written
continuously.
Remove cap in order to be able to set the P1 potentiometer.
Screw cap on again after the setting process, in order to ensure the
ƒ
degree of protection of the inverter.
P1
Description
Write preset setpoint 3 to C00039/3
90
0
[%]
0
l
EDK84DGDVBxxx4 DE/EN/FR/ES/IT 8.3
Setting
...
9
...
100