Lenze L-force E84DGDVB 4 Serie Instrucciones Para El Montaje página 99

Keypad display
MCTRL: Act speed val.
C00051
0 rpm
8. Load Lenze setting to inverter.
–
For this purpose, the device command "Load Lenze setting" is available
which can be executed via code C00002/1 with the keypad:
)
Note!
With the "Load Lenze settings" command, values that have been
changed previously are overwritten. Default settings for a specific
motor, e.g. by Lenze for motor mounting with geared motor, are
reset.
EDK84DGDVBxxx4 DE/EN/FR/ES/IT 8.3
Commissioning via the diagnosis terminal
Action
Use left function key •to change to main menu.
l
Commissioning
Commissioning steps
6
99