Maintenance; Maintenance Schedule - Briggs & Stratton BRUTE Manual Del Operador

Maintenance

Maintenance Schedule

Follow the hourly or calendar intervals, whichever occurs first. More frequent service is required when operating
in adverse conditions noted below.
Maintenance Schedule - Fill in Dates as You Complete Regular Service
Maintenance Task
Pressure Washer
Check/ clean water inlet screen
Check high pressure hose
Check detergent siphoning
hose/ filter
Check spray gun and assembly for
leaks
Check in-line filter
Prepare pump for storage below 32°F
Engine
Check oil level
Clean debris
Change engine oil
Service air cleaner
Service spark plug
Service spark arrester
Air cooling system
Clean combustion chamber
Prepare for storage
1
Clean if clogged. Replace if perforated or torn.
2
Change oil after the first (5) operating hours and every 50 hours or yearly thereafter. Change oil sooner when operating under dirty or dusty conditions.
3
Replace more often under dirty or dusty conditions.
General Recommendations
Regular maintenance will improve the performance
and extend the life of the pressure washer. See any
qualified dealer for service.
The pressure washer's warranty does not cover items
that have been subjected to operator abuse or
negligence. To receive full value from the warranty,
the operator must maintain the pressure washer as
instructed in this manual, including proper storage as
detailed in Winter Storage and Long Term Storage.
NOTE: Should you have questions about replacing
components on your pressure washer, please call
(800) 743-4115 for assistance.
Some adjustments will need to be made periodically
to properly maintain your pressure washer.
16
Service Dates
Every 25 Every 50
Before
Hours or Hours or
Each Use
Yearly Yearly
X
1
X
X
X
X
X
X
X
X 3
X
If unit is to remain idle for longer than 30 days.
All service and adjustments should be made at least
once each season. Follow the requirements in the
Maintenance Schedule chart above.
NOTE: Once a year you should clean or replace the
spark plug, clean or replace the air filter, and check
the spray gun and nozzle extension assembly for
wear. A new spark plug and clean air filter assure
proper fuel-air mixture and help your engine run better
and last longer.
Emissions Control
Maintenance, replacement, or repair of the emissions
control devices and systems may be performed by
any non-road engine repair establishment or
individual. See Emissions Control System Warranty in
Warranties section.
Every 100
100-300
Hours or
Hours
Yearly
See Winter Storage
2
X
X
3
X
Service Dates
BRIGGSandSTRATTON.com