Torin BIG RED TY30028 Manual Del Propietário página 13

5. Connect the air inlet fitting, to shop air supply. Pump air into the system until the ram nears the work piece.
Then release the trigger when pumping needs to stop. OR When an air source is unavailable, pump the
handle until the ram nears the work piece.
CAUTION: Before beginning applying full pressure to work piece, keep ram and work piece aligned to
ensure center-loading. Do not overload workpiece.
6. When work is complete, turn off the air valve (or stop pumping handle), Slowly turn the release valve
counter-clockwise in small increments until ram is free from work piece.
7. Once ram has fully retracted, remove work piece from bed frame. Cautiously remove work piece frompress.
Air fitting inlet
13