Disassembly And Repair; Disposal - Festo ELGA-TB-G Instrucciones De Utilizacion

ELGA-TB-G/-KF/-RF
Amount of lubricant at each relubrication opening:
Size
Amount of lubricant
Oil
Grease
Tab. 4
8

Disassembly and repair

WARNING
Unexpected movement of components.
Injury due to impact or pinching.
• When working on the axis, switch off the controller and secure it to prevent it from
being switched back on unintentionally.
• Observe notes on transport (è 4 Transport).
• Remove motor cables and mounting screws.
In case of repair:
• Send axis to Festo or contact Festo service (è www.festo.com).
Festo carries out the required repairs, fine adjustments and checks.
Information about spare parts and accessories (è www.festo.com/spareparts).
9

Disposal

• Dispose of the packaging and the axis at the end of its useful life through environmentally friendly
recycling in accordance with applicable specifications.
40
70
[ml] 1.0 ... 1.5
[g] 0.4
80 120
1.5 ... 2.5 2.5 ... 4.5
0.8 2.0
Festo – ELGA-TB-G/-KF/-RF – 1502c English
150
–
3.4