Replacement Parts - Omnifilter US1750 Instrucciones De Instalación

TROubLESHOOTING
Leaks between filter head assembly
and filter cartridge
1.
Relieve pressure. Turn off the water supply to the system and
open faucet until water flow stops. Place a bucket or towel
under the system to catch any water drips.
2.
Remove cartridge and inspect o-rings to make sure they are
properly seated and clean.
3. Install filter cartridge. Place system into operation and check
for leaks. If leaks persist, turn off the water supply and
contact OMNIFILTER Customer Service at 800.937.6664
M–F 7:30 AM–5 PM CST.
Leaks from tubing fittings
1.
Relieve pressure. Turn off the water supply to the system and
open faucet until water flow stops. Place a bucket or towel
under the system to catch any water drips.
2.
Depress collet on system or inlet supply adapter tubing
fittings and pull tubing from fitting. Inspect surface of tubing
for scratches or debris. Clean or cut back tubing to access
clean surface.
3. Wet the end of the inlet tubing and press into the inlet
fitting of the system. Ensure the tubing is fully pushed past
the fitting o-rings. Place system into operation and check
for leaks. If leaks persist, turn off the water supply and
contact OMNIFILTER Customer Service at 800.937.6664
M–F 7:30 AM–5 PM CST.
• 6 •

REPLACEMENT PARTS

Part Number Description
1 SH455911-127 1750R Filter Cartridge
or
SH455910-127 1500R Filter Cartridge
2 SH357268 Filter Head Assembly
3 SH244747 US1750 Kit
SH243210 Wall Mount Bracket
SH243217 Mounting Screws
SH146985 Change Indication Sticker
4 SH143431 Inlet Supply Adapter
5 SH244771 Faucet Assembly
6 SH144072-03 1/4-inch tubing
7 SH244606 Teflon
®
SH147911 Manual
1
2
3
For replacement parts contact your local OMNIFILTER retailer or
call OMNIFILTER Customer Service at 800.937.6664.
QTY
1
1
1
1
1
2
1
1
1
6 ft.
Tape 30"
1
5
4
6
7