Samsung WA52J8060A Serie Manual Del Usuario página 57

ii i ii
il ii_ ii:
if: ii : :i_i_ _
i 8
iiiill _ii
i ¸ 10¸¸¸¸¸¸¸
4C2
5C
9C!
9C2
AC6
dC
HC
• Make sure the cold water supply hose is firmly connected to the
cold water tap.
If it is connected to the hot water tap, the laundry may be
deformed with some cycles.
Water is not draining.
• Make sure the drain hose is not frozen or clogged.
• Make sure the drain hose is positioned correctly, depending on
the connection type.
• Clean the debris filter as it may be clogged.
• Make sure the drain hose is straightened all the way to the
drain system.
• If the information code remains, contact a customer service
centre.
The electronic control needs to be checked (Over Voltage Error).
• Check the PCB and wire harness.
• Check if power is supplied properly.
• If the information code remains, contact a customer service
centre.
Low voltage detected
• Check if the power cord is plugged in.
• If the information code remains, contact a customer service
centre.
Inverter Communication problem
• Check the Inverter PCB and wire harness.
• If the information code remains, contact a customer service
centre.
Operating the washer with the door open.
• Make sure the door is properly closed.
• Make sure laundry is not caught in the door.
High temperature heating check.
• If the information code remains, contact a customer service
centre.
English 57
\\TAS000J \\TA8700J "_\TA52J 03133Y 01 ENindd 57 2015/4/20 15:33:55