Operating Instructions - Flex CSM 4060 Manual De Instrucciones

Portable circular saw for metals CSM 4060
This may significantly increase the exposure
level over the total working period.
For a precise estimation of the vibration load the
times should also be considered during which
the power tool is switched off or even running,
but not actually in use. This may significantly
increase the exposure level over the total
working period
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
Caution
Wear ear protection at a sound pressure
above 85 dB(A).

Operating instructions

Danger!
Before carrying out any work on the power
tool, always pull out the mains plug.
Before switching on the power tool
Unpack the portable circular saw and check
that there are no missing or damaged parts.
Compare the mains voltage with the
specifications on the rating plate (5).
Attaching or changing the
saw blade
Pull out the mains plug.

Loosen the Allen screws (7) and remove

the sawdust guard (15).
Press and hold down the spindle lock (9).

Loosen the locking screw (20 a) in an anti-
clockwise direction with an Allen key.
Unscrew the locking screw (20 a) and

remove the front clamping flange (20 b).
Remove the saw blade.
Danger!
Observe the installation location of the rear
–
clamping flange (20 c) and front clamping
flange (20 b).
The cutting direction of the teeth (direction
–
of arrow on the saw blade) and direction-
of-rotation arrow on the housing must
agree.
19