Igloo IRF32DDRSRD Manual De Instrucciones página 10

ASSEMBLY
Hardware
#1 Screw
Qty. 6
Door Handle Assembly
1. Remove the two #1 Screws from the exterior of the refrigerator
door using a Phillips-head screwdriver.
2. Align the holes of the #2 Door Plate with the holes on the refrigerator door. Secure
the #2 Door Plate to the door using the two #1 Screws and screwdriver.
3. Slide #3 Door Handle into the #2 Door Plate until securely locked into place. Repeat these
steps for the other Door Handle.
Bottle Opener Assembly
1. Remove the two #1 Screws from the exterior of the refrigerator
door using a Phillips-head screwdriver.
2. Align the holes of the #4 Bottle Opener with the holes on the refrigerator door. Secure the
#4 Bottle Opener to the door using the two #1 Screws and screwdriver.
#2 Door Plate
Qty. 2
#3 Door Handle
Qty. 2
#4 Bottle Opener
Qty. 1
8