TROUBLESHOOTING
Problem
Possible cause
The device is
The voltage is too low.
exceptionally loud
and humming.
The water indicator
There is too little water in
goes on.
the tank.
The float has not been
installed correctly.
The float switch is broken.
The indicators on
The fuse is broken or the
the control panel
unit is switched off.
do not light up.
The ice cubes are
The water temperature is
too large and stick
too low.
together.
There is ice from the last
run in the water bowl.
The device is
Problem with the coolant.
running but does
The compressor is broken.
not produce ice.
The fan motor is damaged.
All lights flash
Since ice has no contact
simultaneously.
with the ice bar.
The moving detection
mechanism on the ice bar
is broken.
The ice reaches the
The movable detection
ice bar but the ice
mechanism on the ice bar
container display
is broken.
does not start.
The display is broken.
Suggested solution
Stop the unit and plug it into
an outlet that has the specified
voltage.
Top up with water.
Contact a specialist company.
Replace the fuse or switch on the
appliance.
Select small ice cubes.
Switch to standby mode and
remove the ice.
Contact a specialist company for
inspection and repair.
Disconnect the plug and restart
the appliance.
Contact a specialist company.
Contact a specialist company for
inspection and repair.
EN
17