Tabla de contenido
Publicidad
TYPE OF INSTALLATION AND RANGE OF PROGRAMMING CODES OF TELEPHONES/ CONNECTION BRACKETS
If you wish to assign a number between 1 and 9999 to the telephones/connection brackets, or if the panel is going to be working in an installation
which is not standard, you will have to reconfigure the entrance panel before programming these devices. See "Configuration of the entrance
panel according to the installation".
These parameters can be adapted at any time, before or after programming the equipment. See page 28.
Ces paramètres peuvent être adaptés à tout moment, avant ou après la programmation de l'équipement. Voir page 28.
VISITOR: SCREENS
Modify the factory default screen options on page 29.
Enable a menu which makes it possible for a third party (the administrator) to perform small modifications in the electronic directory. See page
37.
See page 33.
CONFIGURATION OF THE ENTRANCE PANEL ACCORDING THE INSTALLATION
BASIC INSTALLATION
Description
Location
Type of panel
Panel number
Range of codes
Range of values for codes of the connection brackets/telephones: '3' - numbers from 1 to 999. '4' - numbers from 1 to 9999
2 - W I R E
CONFIGURATION OF THE ENTRANCE PANEL
OPERATING PARAMETERS
ENABLE ADMINISTRATOR MENU
CHANGE THE MASTER CODE
INSTALLATION PARAMETERS
Default value
BUILDING
MAIN
D O O R
E N T R Y
S Y S T E M S
Value to be chosen
BUILDING
MAIN
Change the value in…
Configuration
Definition of panel
Publicidad
Tabla de contenido
