HoMedics TONY LITTLE DESIGNS AG-3501TL Manual De Uso página 4

4. Attach Seat/Leg Frame to Base:
• Flip the chair on its back and slide the seat in place. Place into frame
with the straps facing the back of the chair (figure 6).
Figure 6
• Align the seat by inserting large bolts into the frame.
• Place washer and nut over each bolt to secure the Seat Frame to the
Chair Base. Use open end wrench to tighten partially (figure 7).
Figure 7
• Stand chair upright and adjust so the base is level. Completely tighten
all nuts and bolts now (figure 8).
Figure 8
6
5. Add Massage Cushion:
• Slide the top pocket of the massage cushion over the top of the back
frame (figure 9).
Figure 9
• Slide the bottom pocket over the foot frame by lifting up the footrest
(figure 10).
Figure 10
• Smooth down the massage cushion and make it flush with the frame
(figure 11).
F i g ur e 1 1
• The pillow can be repositioned or completely removed by adjusting the
strap on the back of the chair (figure 12).
Figure 12 6. Finishing Details:
• Remove all letter and number stickers.
• To add the cup holder, remove the T-block cover and insert the cup
holder into either armrest (figures 13A and 13B).
• Feed the power and hand control cord through the back of the frame.
Be sure the cords are not twisted.
• Attach the power cord to the adaptor and store the hand control in the
pocket on the right side.
Figure 13A
7
Figure 13B