Prince Castle Channel Serie Manual De Instrucciones página 2

INSTALLATION
1. After you have removed the timer from the carton,
inspect the unit for signs of damage. If there is
damage to the unit:
• Notify carrier within 24 hours after delivery.
• Save carton and packing materials for
inspection purposes.
• Contact your local dealer or, if purchased
directly, the Prince Castle Customer Sales
Department at 1-800-722-7853 to arrange for a
replacement to be sent.
2. Verify that all parts have been received. Bracket
Mounting screws provided.
3. To mount the timer, place mounting brackets in
desired location. Scribe location of mounting
holes, center punch, and drill holes. Attach timer
to mounting brackets placing star washer
between bracket and timer.
DISPLAYS AND INDICATORS
TIME Shows the time for the selected
Display channel number.
CHANNEL Shows the channel number
Display selected and in use. (The 741-T2
model does not have this display.)
H:M Indicates the time value is in Hours
and Minutes.
M:S Indicates that the time value is in
Minutes and Seconds.
LED Located above each channel timer
Indicators button, these lights change color
depending on the stage of the
countdown.
Green = first 70% of countdown,
Yellow = next 20% of countdown,
Red = last 10% of countdown.
741-500FGISrevA
CONTROLS
Channel The 741-T2 has 2 channels, the
(Timer) 741-T4 has 4 channels, the 741-T8
has 8 channels and the 741T12 has
12 channels.
SCAN/UP In the program mode, it increases
ARROW time values for each channel. In the
Run Mode, it is used in conjunction
with logo button to increase the
volume.
SCAN/DOWN In the program mode, it decreases
ARROW time values for each channel. In the
Run Mode, it is used in conjunction
with logo button to decrease the
volume.
PRINCE Activates Program Mode and used
CASTLE to adjust the alarm sound level.
Logo
PROGRAMMING
1. To program, press and hold the PRINCE
CASTLE logo for six seconds. The TIME display
changes from ---- to Prog , and a beep will sound.
See figure 1.
figure 1
2. Select and press the timer channel to be
programmed. The LED indicator for the selected
button will turn yellow and a beep will sound. The
selected channel number will be displayed in the
CHANNEL display, the current programmed time
for that channel will be displayed in the TIME
display, and the time value will indicate either H:M
OR M:S. See figure 2.
2