Receiving The Product; Handling; Location; Example Of Handling - AERMEC NRC Serie Manual Instalación

1. 1

HANDLING

Before moving the unit, examine the
dimensions, weights, centre of mass
and lifting points, then check that the
equipment for lifting and positioning
is suitable and complies with safety
regulations currently in force.
Particular attention must be paid to
all the loading, unloading and lifting
operations so as to avoid hazardous
situations for people and damage to
the structure and operational parts of
the machine.
IT IS absolutely forbidden to leave
objects on the unit.
Personnel engaged in handling the
machine must have the proper personal
protection devices.
Under no circumstances must anybody
or anything stop under the unit, even
briefly.
- Check that the cables are type-
approved to support the weight of
the unit, and make sure they are

1.2. 1 Example of handling

The diameter of the lifting holes is 40 mm

RECEIVING THE PRODUCT

1
well fixed.
- The lifting frame must have the
lifting point on the vertical of the
centre of mass (the axes of the
centre of mass are indicated by
adhesive labels on the base).
During lifting you are advised to fit anti-
vibration mounts, fixing them to the ho-
les on the base unit in accordance with
the assembly layout supplied with the
accessories (VT-AVX).
1.2

LOCATION

Machines of the NRC series must be in-
stalled indoors, in a suitable area. This
means installation with the necessary
technical clearances. This is essential,
both to allow routine and extraordinary
maintenance interventions, and for
operational needs, as the device must
gather air from the outside, along the
perimetric sides, and expel it upwards.
For the correct working of the unit,
it must be installed on a perfectly
horizontal surface. Make sure that
the resting surface is able to bear
the weight of the machine. The device
is made of galvanised steel sheet and
hot painted with polyester powders to
resist bad weather. This means that no
particular measures have to be taken
to protect the unit.
NOTE:
the device must be installed in such a
way as to make all maintenance and/
or repair operations possible.
The warranty of the device does not
in any case cover costs incurred
as a result of motorised ladders,
scaffolding or any other lifting
systems made necessary to carry out
the operations under warranty.
3