11
2. Take out the upper freezer
by lifting it up from the rail system.
from the rail system.
3. Remove the lower freezer
lifting it up.
4. Remove the 4 screws attached to the
screws attached to the
supporting frame (D).
freezer drawer (A)
freezer drawer (C) by
5. Pull out the freezer door and lift it up
the direction of the arrow.
Re-assembling the freezer door
assembling the freezer door
To reattach the drawer after you moved
To reattach the drawer after you moved
the
the
appliance
appliance
to
to
assembling the parts in reverse order.
the parts in reverse order.
(Optional)
Installing the water lines and filter
Installing the water lines and filter
Installing the water filter
Installing the water filter
To fit the water filter, follow the installing
To fit the water filter, follow the installing
steps below.
1. Take out the water filter and water lines
ake out the water filter and water lines
from the fridge room.
2. Determine the location to mount the
etermine the location to mount the
external filter. (Note: The water filter
external filter. (Note: The water filter
should be mount on the wall where it is
should be mount on the wall where it is
convenient to be replaced, and do not
convenient to be replaced, and do not
mount on the wall behind the refri
mount on the wall behind the refrigerator.)
3. Determine the distance between the
etermine the distance between the
filter and the tap, and the distance from
filter and the tap, and the distance from
the filter to the fridge. Prepare lines as
the filter to the fridge. Prepare lines as
required lengths. (Cut the proper lengths
required lengths. (Cut the proper lengths
of water lines which you determine to
of water lines which you determine to
connect with the filter inlet or outlet.)
connect with the filter inlet or outlet.)
4. Mount the filter holder onto the wall by
ount the filter holder onto the wall by
using a screwdriver and attach the water
using a screwdriver and attach the water
filter.
door and lift it up in
its
its
final
final
location,