Specification; Electrical Supply; Working Environment; Warning - Techne CE3350 Manual Del Usuario

Specification

Figures quoted are at the base of the well at the time of calibration.
This unit has a fixed block with six variations to hold four or five probes of different sizes.
See page 31 for the different blocks.
Temperature range
Over-temperature limit
Temperature stability(10 min)
Display resolution
Accuracy at 100°C to 300°C
Heat up time 20° C to 300°C
Cool down 300°C to 100°C
Immersion Depth
Fan Cooling
Weight
Dimensions H x W x D

Electrical supply

Voltage Cycles
230V 50/60Hz
120V 50/60Hz
100V 50/60Hz

Working environment

The calibrator units are designed to work safely under the following conditions:
Ambient temp. range
Humidity
Note: The control specifications are quoted for an ambient temperature of 20°C. The
specification will be closely held if the ambient temperature is in the range 10°C to
30°C. Outside this range the quoted figures may deteriorate but the unit will still
work safely.
Radio frequency interference tested and passed to EN50081-1.
Immunity Tested and passed to EN50082-1

Warning

Warning: HIGH TEMPERATURES ARE DANGEROUS
!
Avertissement: DANGER DE TEMPERATURES ELEVEES
Warnung: HOHE TEMPERATUREN SIND GEFÄHRLICH
Aviso: LAS TEMPERATURAS ELEVADAS SON PELI
20 °C above ambient to 350 °C
400 °C approximately
±0.15 °C @ 200°C
0.1 °C
±1°C
5.2 minutes
10.8 minutes
101.4mm (4")
Automatic
1.5 Kg
72 x 128 x 178 mm excluding the handle
Power
400W
400W
400W
5°C to 40°C
Up to 95% relative humidity, non-condensing
12