Ip Protection Degree; Electrical Insulation Degree; Declaration Of Absence Of Dangerous Substances; Fixed Closure Guards Safety - TECNOPLUS Sistem-air Domestic TECNO R-evolution Serie Manual Tecnico

TECNO R-evolution Instruction manual
ByTecnoplus
s.r.l.
CENTRAL VACUUM SYSTEMS
TECNOPLUS S.R.L. declines any form of responsibility or guarantee if the purchaser,
WARNING:
or anyone in his stead, makes even the slightest modifi cation or adjustment to the purchased product.
The unit has been designed to satisfy at best the present needs of the domestic central vacuum clea-
ners market, both in terms of quality and operating capacity.
All materials and components used to manufacture this product comply with CE safety regulations. All
relevant certifi cations are held at the offi ces of TECNOPLUS S.R.L.

5.1 IP Protection Degree

IP 44: The appliance features a protection against solid objects having a size exceeding 1 mm and pro-
tection against splashes of water (splashes of water from any direction on the cover must not produce
dangerous effects).

5.2 Electrical insulation degree

CLASS I: the appliance features basic electrical insulation.
Must be connected to the ground circuit through the main electric circuit.

5.3 Declaration of absence of dangerous substances

TECNOPLUS S.r.l. declares that its products and appliances have been manufactured with materials
which comply with the restrictions established by the health and environment protection regulations in
force and do not contain SVHC-classifi ed substances (Substance of Very High Concern) in compliance
with CE regulation 1907/2006 (REACH: i.e. Registration, Evaluation, Authorization and Restriction of
Chemical Substances). Although these substances have not been used during the processing cycles of
raw materials and during the manufacturing cycles of our products, their presence in p.p.m. (parts per
million) cannot be completely excluded due to micro-pollution of raw materials.

5.4 Fixed closure guards safety

The vacuum cleaner is delivered to the Customer with its main body completely assembled. Moving
parts (suction motor turbine blades) are protected by a protection grid directly assembled on the inlet of
the suction motor compartment. This protection grid cannot be accessed by the operator. The operator
also does not have access to the electrically-operated parts of the appliance which are protected by a
cover which can only be removed by unscrewing the Torsen screws used to fi x the soundproofi ng dome
of the housing where the suction motors are assembled.
Every intervention on the control board and on the motors must be carried out by qualifi ed personnel
only after disconnecting the electrical power supply and by removing the electric plug from the electric
socket.
14
21/01/16 Rev:3.0.0