Step 2. Installing Software - Belkin Wireless G Manual Del Usuario

Installation Procedure
Note:
1.
You must use the power adapter shipped along with the
Print Server; do NOT use any other power adapter.
2.
To prevent compatibility problems, power on the
Print Server before powering on the printer.
3.
Before connecting the standard printer via USB cable,
read the printer's manual. Some printers require users
to install drivers and utilities before connecting to the
computer. Some printers also require users to connect
the printer to the computer during installation.

Step 2. Installing Software

Before you start, verify your computer's operating system. This
program can be run in Windows 2000 SP4 or above, and Windows XP
SP1 or above.
1.
Insert the included CD into your CD-ROM drive. The
autorun.exe program should start automatically. If it does
not, run autorun.exe manually from your CD-ROM drive.
To do this, manually navigate to your CD-ROM drive and
double-click on "autorun.exe" to start the install.
2.
The following
screen will
be displayed.
Click "Install"
to launch the
Installation
Wizard.
11 11
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17