For Models With Dual Power And Reverser; For 16-Speed Tractors - GOLDONI 3000 STAR Serie Manejo Y Cuidado

4.4.4 For models with Dual Power and reverser:

Use lever n.1 fig.1 as follows: (see fig.12):
1) Decide whether you want to work in 16+8 (Dual Power) mode or 8+8 speeds
(Reverser).
In 16+8 speed mode with the same lever (n.1 fig.1) you can have:
N = Neutral
L = Slow
V = Fast
R = Reverse
Also, with the Dual Power control lever (n.4 fig.2), you can select the following
speed ranges (fig.13):
N = Neutral
V = Fast
R = Dual Power Low
In 8+8 speed mode with the same lever (n.1 fig.1) you can have:
N = Neutral
L = Slow
V = Fast
R = Range with retainer: cannot be selected.
With lever n.4 fig.2, the following speeds can be obtained (fig.13):
N = Neutral
V = Forwards
R = Reverse
Reverse or subsequent forward drive engage must always be done with the
engine at minimum revs and stopped.
2) Select the speed you want with lever n.12 fig.1, as shown in fig.9.
Lever n.4 fig.2 can also be moved after the speed range has been selected.

4.4.5 For 16-speed tractors:

Select the range with lever n.1 fig.1.
Positions (fig.14)
N = Neutral
L = Slow
V = Fast
Select the speed with lever n.12 fig.1 from the combinations shown in fig.9.
Lever n.4 fig.2, can be used for (see fig.15):
N = Neutral
A = Forward
R = Reverse
Reverse drive and subsequent forward drive must be engaged with the engine
at minimum revs and the tractor stopped.
62