NuWave OxyPure Manual Del Usuario página 19

CARE & MAINTENANCE (Continued)
The order of the filters inside the OxyPure is as
follows (bottom to top):
1. Stainless Steel Pre-Filter (washable)
2. Bio-Guard
™
3. Ozone Emission Removal Filter (not washable)
RESET FILTER 4
HOLD FOR 2 SECONDS
4. HEPA/Activated Carbon Combo Filter
(not washable)
• The OxyPure should be placed on the floor
when assembling the filters.
TURBO
HR CLEAN
WIFI
The CLEAN FILTER 2 indicator will turn blue after 3 to 6 months, indicating
the filter should be cleaned for optimal results (Bio-Guard
The CLEAN FILTER 2 indicator will turn red after 6 months of use,
indicating the filter needs to be cleaned.
The REPLACE FILTER 4 indicator will turn red when the filter (HEPA/
Activated Carbon Combo Filter) needs to be replaced. The filter will last up
to 5 years depending on how often the unit is running in its environment.
Changing the Filters
The filters inside the filter slot need to be changed or cleaned on schedule
to help the OxyPure maintain optimum, efficient performance.
Remove Filter Slot Cover in back rear of the OxyPure using its built-in handle.
1.
Slide out filters that need cleaning or replacement.
2.
Allow washable filters to dry completely before reinstalling into unit.
3.
Never place a wet filter into the OxyPure.
•
Filter Slot Cover must be secure or unit will not work.
•
DO NOT WASH Ozone Emission Removal Filter or HEPA/Activated Carbon
Combo Filter. Ozone Emission Removal Filter should be replaced every 20
years. The HEPA/Activated Carbon Combo Filter should be replaced every
5 years, depending on how often the unit is running in its environment.
Filter (washable)
AIR
DIRTY
CLEAN
FILTER 2
Unplug the OxyPure from the power source before inserting
or removing any parts or attachments and before cleaning.
ODOR
NO STRONG
ODOR ODOR
REPLACE
FILTER 4
CAUTION
4
3
2
1
Filter).
™
Owner's Manual
19