Replace The Sensor Strip & The Battery; Battery Replacement - Tena SmartCare Instrucciones De Uso

Sensor strip replacement
Sometimes, however, the hooks on the back of the sensor strip can become covered with
For cleaning advice, see page 22 of this guide.
1

Battery replacement

If the LED light starts to blink, either the battery needs to be replaced or the transmitter is not
the battery can be replaced whenever needed.
1
release
CHECK
then tap the transmitter in your hand until the battery falls out.
The transmitter is designed to withstand attachment and removal from
a sensor strip four times per year over two years. With more frequent
attachments/ removals, the system may not work as intended.
REPLACE THE SENSOR STRIP & THE BATTERY
can also be used
2
battery
21
TENA SmartCare Change Indicator
2
transmitter
TM/MC
EN