Replace The Sensor Strip & The Battery; Battery Replacement - Tena SmartCare 91280 Instrucciones De Uso

EN REPLACE THE SENSOR STRIP & THE BATTERY
Sensor strip replacement
Sometimes, however, the hooks on the back of the sensor strip can become covered with
1

Battery replacement

If the LED light starts to blink, either the battery needs to be replaced or the transmitter is
1
release
CHECK
then tap the transmitter in your hand until the battery falls out.
The transmitter is designed to withstand attachment and removal from
a sensor strip four times per year over two years. With more frequent
attachments/ removals, the system may not work as intended.
can also be used
2
battery
22
TENA SmartCare Change Indicator
2
transmitter
TM/MC