Attention; Maintenance,Transportation And Storage; Cleaning And Disinfection - Gima SP-10 Manual Del Usuario

1) Connect the device with computer by data line, double press the icon to open the PC software procedure.
2) Press the corresponding key to achieve upload data, delete case, print information, background, select lan-
guage, switch PDF format, set the testee information etc.
3) Press "Exit" to exit the software, unplug the data line from the computer to achieve uploading.

6.2 Attention

 Please check the device before using, and confirm that it can work normally.
 Rechargeable lithium battery.
 It is recommended that the device should be measured in room.
 Excessive ambient light may affect measurement accuracy. It includes fluorescent lamp, dual ruby light, infrared
heater, direct sunlight and etc.
 Intense activity of the subject or extreme electrosurgical interference may also affect the accuracy.
 Please clean and disinfect the device after using according to the User Manual (7.1).
Chapter 7

MAINTENANCE,TRANSPORTATION AND STORAGE

7.1 Cleaning and disinfection

Using medical alcohol to wipe the device for disinfecting, nature dry or clean it with clean soft cloth.
It's necessary to clean the turbine periodically for accuracy, keep the diaphaneity of the lucency part, and keep it
away sundries (such as hair or lesser sediment). Immerse the turbine in disinfectant after use, clean it with clean
water and dry standing vertically after soaked a few minutes (but don't make the turbine rinsed with water directly),
this type doesn't bring pollution to environment. (Note: the disinfectant is 75% alcohol).
ENGLISH
24