Lutron GRAFIK Eye QS System Manual De Instrucciones página 24

Timeclock Operation
Set Location
Main menu
1. Enter programming mode (see page 12).
2. Use the master buttons to highlight
Timeclock
Timeclock
"Timeclock" and press the OK button to
Scene setup
accept.
3. Use the master buttons to highlight
"Location" and press the OK button to
Timeclock
accept.
4. Use the master buttons to choose to set
Time & date
your location by either country and city
Delete event
Location
or latitude and longitude. Press the OK
button to accept.
Location by
5. Use the master buttons to highlight the
country and press the OK button to
Country, City
accept. Repeat for the state and closest
Lat/Longitude
city.
6. The info screen will display a
confirmation screen that your time and
Country
date have been saved.
7. Exit programming mode (see page 12).
08 : 00 USA
State
Pennsylvania
City
Saved
Philadelphia
R
Saved
Set Daylight Saving Time
Timeclock 1. Enter programming mode (see page
12) and select "Timeclock". Use the
master buttons to highlight "Set
Location
DST" and press the OK button to
Delete event Set DST
accept.
2. Use the master buttons to highlight
Use DST?
"YES" if your location observes
daylight saving time, or "NO" if it
does not. Press the OK button to
Del: 00 YES
accept.
3. If yes, use the master buttons to
choose either "USA 2007" (the
second Sunday in March to the first
Sunday in November), or "Other."
For "Other," follow the screens to
set start and end dates and amount
of time.
4. Press the OK button to accept. The
info screen will display a
confirmation screen that your time
and date have been saved.
5. Exit programming mode (see page
12).
GRAFIK Eye QS System Installation and Operation Guide 24
®
Master
buttons
OK
OK
button